User Manual Q&AAnswer
Feb 04, 2025 - 03:00 AM
To pair the REFCOM SPINTSO 2.0 Bluetooth 5.1 units, follow these steps:
1. Mark the two units with "A1" and "MASTER" for easy identification.
2. Start both units by pressing and holding the ON button until they activate.
3. Erase any current pairing connections on both units by pressing and holding the + and - buttons simultaneously until the LED emits a red flash.
4. Restart both units.
5. Place the units 15 cm apart from each other.
6. Press and hold the A-button on the A1 unit, and the B-button on the MASTER unit until the LED starts flashing rapidly in red and blue colors.
7. Make a short key-press on button A on the A1 unit.
8. Wait for a moment until both units stop flashing rapidly.
9. Once again, make a short key-press on button A on the A1 unit. After a moment, the LEDs on both units will flash slowly in red and blue colors, indicating that communication is established.
10. Shut down both units by pressing the OFF button.
11. The pairing is stored and will be remembered even after shutting down.
Note: If you are setting up a 3-set or 4-set, please refer to the respective sections in the user manual for the pairing instructions.
Please refer to the REFCOM SPINTSO 2.0 Bluetooth 5.1 user manual for more detailed instructions and troubleshooting tips.
Add New Comment