User Manual Q&AAnswer
Feb 04, 2025 - 02:18 AM
To connect and configure accessories to the AZM4 Atmosphere 4-Zone Audio Processor, please follow these steps:
1. Use CAT5e or CAT6 cable to connect the accessories to the host processor.
2. Each accessory port can accept up to 1 remote audio wall plate (2 per AZM4, 4 per AZM8).
3. One audio wall plate (A-XLR, A-RCA, A-BT) can be used per accessory port.
4. Up to 8 accessories can be daisy-chained from a single port.
5. Up to 16 accessories can be connected to a single AZM4 (a maximum of 8 X-ANS accessories can be used per AZM4).
6. The maximum cable length from the AZM4 to the last accessory on the chain is 1000' (305m).
7. There are no cable length restrictions between accessories.
Please refer to the user manual for more detailed instructions on connecting and configuring accessories for the AtlasIED AZM4 Atmosphere 4-Zone Audio Processor.
Add New Comment