User Manual Q&AAnswer
Feb 04, 2025 - 02:04 AM
To install the ACME LP-2304 Thunderstruck fixture, follow these steps:
1. Unpack and carefully inspect the unit for any transportation damage before use.
2. Mount the unit using its xxxx holes on the bracket. Ensure that the unit is firmly fixed to avoid vibration and slipping during operation.
3. Make sure the structure to which you are attaching the unit is secure and able to support a weight of 10 times the unit's weight.
4. Use a safety cable that can hold 12 times the weight of the unit when installing the fixture.
5. The unit must be installed by professionals in a location that is out of reach of people and where no one passes by or under it.
6. Mount the unit at a height of 0 to 30 meters.
7. Use the lamp hook and safety rope to secure the unit.
8. Connect the power input/output using the provided power cord.
9. For DMX512 link, use a 3/5-pin XLR plug cable to input the DMX signal and link the next unit.
10. Ensure that the DMX output and input connectors are properly connected and pass-through to maintain the DMX circuit.
11. Terminate the DMX cable with a terminator at the last fixture to reduce signal errors.
Please refer to the user manual for more detailed instructions and illustrations on the installation process.
Add New Comment