User Manual Q&AAnswer
Feb 04, 2025 - 01:58 AM
To change the color on the BOOTES BEAM 400 Light, follow these steps:
1. Make sure the light is powered on and connected to a DMX controller.
2. Use the DMX controller to select the appropriate DMX channel for color control (either 14 or 19, depending on your setup).
3. Access the color wheel by navigating the DMX controller to the corresponding channel.
4. Use the DMX controller to scroll through the available colors and select the desired one.
5. The light will change its color accordingly.
To change the gobo on the BOOTES BEAM 400 Light, follow these steps:
1. Ensure that the light is powered on and connected to a DMX controller.
2. Use the DMX controller to select the appropriate DMX channel for gobo control (either 14 or 19, depending on your setup).
3. Access the gobo wheel by navigating the DMX controller to the corresponding channel.
4. Use the DMX controller to scroll through the available gobos and select the desired one.
5. The light will project the chosen gobo pattern.
For more detailed instructions and information, please refer to the BOOTES BEAM 400 Light User Guide.
Add New Comment