User Manual Q&AAnswer
Feb 04, 2025 - 01:57 AM
To clean the PULACO 95GPH 5W Mini Submersible Water Pump, follow these steps:
1. Turn off the power supply: Before cleaning the pump, make sure to turn off the power supply to ensure safety.
2. Remove the pump from the water: Take the pump out of the water or aquarium it is submerged in.
3. Disassemble the pump: The PULACO Mini Submersible Water Pump is designed to be easily detachable. Separate the different parts of the pump, including the impeller cover, impeller, and other components.
4. Clean the components: Rinse all the components under running water to remove any debris or dirt. You can also use a soft brush to gently scrub the parts if necessary. Avoid using any harsh chemicals or abrasive materials that may damage the pump.
5. Reassemble the pump: Once all the components are clean and dry, reassemble the pump by putting the parts back together in the correct order.
6. Submerge the pump: Place the pump back into the water or aquarium, ensuring that it is fully submerged.
7. Turn on the power supply: Finally, turn on the power supply to start the pump. It should now operate smoothly and quietly.
Regular cleaning every two months or as needed will help maintain the performance and longevity of the PULACO 95GPH 5W Mini Submersible Water Pump.
Add New Comment