Answer

Feb 04, 2025 - 01:55 AM
To set up and use the RENPHO Talking Upper Arm Blood Pressure Monitor, please follow these steps:
1. Insert the included 4 AAA batteries into the battery compartment of the blood pressure monitor.
2. Wrap the blood pressure cuff around your upper arm, positioning it approximately 2-3 cm above your elbow. Make sure the cuff is snug but not too tight.
3. Press the power button on the blood pressure monitor to turn it on.
4. The monitor will automatically inflate the cuff and start measuring your blood pressure. Remain still and avoid talking during the measurement process.
5. Once the measurement is complete, the monitor will display your systolic and diastolic blood pressure readings, as well as your pulse rate, on the digital display.
6. If you have enabled the talking function, the monitor will also announce your readings aloud.
7. To save your measurement, press the memory button on the monitor. You can save up to 120 readings per user, and the measurements will be timestamped for easy reference.
8. To switch between user modes, press the user button on the monitor. The monitor can store readings for two different users.
9. If you prefer to power the monitor using a USB cable, you can connect it to a power source using the included USB cable.
10. After use, you can store the blood pressure monitor, cuff, and other accessories in the included carrying case for convenient storage and portability.
Please refer to the user manual included with the product for more detailed instructions and troubleshooting tips.
Add New Comment