How do I install the Interiors 1900 Flush Light Fitting? (Interiors 1900 Flush Light Fitting Instructions)

Answer

manuals.plus

Feb 04, 2025 - 01:44 AM

To install the Interiors 1900 Flush Light Fitting, please follow these steps:

1. Before starting the installation, make sure to read and understand all the safety warnings and instructions provided in the manual.

2. Switch off the mains supply and ensure the fuse is withdrawn or the circuit breaker is switched off at the distribution board. This is important to ensure safe isolation during the installation process.

3. Decide on the position of the light fitting or remove any existing light fitting. Take note of the electrical connections and ensure there is a solid mounting surface, preferably a wooden joist or joist bridge, to support the weight of the light fitting.

4. Carefully prepare the mounting holes, ensuring not to drill into any pipes or mains cables beneath the surface.

5. Securely fix the light fitting to the mounting surface using the screws and wall plugs provided. Please note that the screws and wall plugs supplied are suitable for "masonry" only. If you are installing on a different surface, you will need to purchase suitable fixings separately.

6. Make sure all electrical connections are tight and that no loose strands are left out of the terminal. It is important to ensure a secure and proper connection.

7. The Interiors 1900 Flush Light Fitting is a Class l product and must be Earthed. The terminal blocks are supplied according to the requirements of the fitting.

8. Once the installation is complete, switch on the mains supply and test the light fitting to ensure it is working properly.

Please note that if you have any doubts or concerns about the installation or use of this product, it is recommended to consult a qualified electrician for assistance.