User Manual Q&AAnswer
Feb 04, 2025 - 01:37 AM
To assemble the MEYER CROSS Antho 68Inch Nickel Floor Lamp, follow these steps:
1. Pre-Assembly: Carefully remove all parts and hardware from the carton, along with any protective plastic packaging. Do not discard any contents until after assembly is complete to avoid accidentally discarding small parts or hardware.
2. Begin Assembly at the Base: Place the Base (A) upright on a solid, flat surface. Attach the Bottom Post (B) to the Base, making sure not to strip the threads. Tighten firmly by hand.
3. Attach the Middle Post: Attach the Middle Post (C) to the Bottom Post, being careful not to strip the threads.
4. Adjust the Top Post Height: Adjust the height of the Top Post (E) to your desired position. Tighten the Adjustment Knobs (F) to secure the height position of the Top Post.
5. Install the Lampshade: Unscrew and remove the pre-installed Lampshade Ring (G*) from the Top Post (E). Turn the Lampshade Ring and tighten it fully to lock the Lampshade (D) in place.
6. Install the Light Bulb: Carefully install the light bulb (not included) after all parts are fully assembled. Make sure to use light bulbs with an E26 (medium) base and do not exceed the specified wattage.
Please refer to the instruction manual for visual illustrations and additional details on the assembly process.
Add New Comment