User Manual Q&AAnswer
Feb 04, 2025 - 01:32 AM
To install the Lifeholder LH-T23-2P Touch Lamp, please follow these steps:
1. Before starting the installation, make sure to turn off the electricity to ensure safety.
2. Unscrew the fastening ring of the lampshade to remove it.
3. Turn the lampshade upside down and place it on the lamp holder.
4. Tighten the ring to secure the lampshade in place, aligning it with the threads.
5. The lamp comes with an E26 Edison bulb included. Install the bulb by screwing it into the lamp socket.
6. Once the lamp is properly installed, you can turn on or off the lamp and adjust the brightness using the touch switch.
Please refer to the user guide for more detailed instructions and safety precautions.
Note: It is important to ensure that the electricity is turned off before installing or handling any electrical components. If you are unsure or uncomfortable with the installation process, it is recommended to seek assistance from a professional electrician.
Add New Comment