User Manual Q&AAnswer
Feb 04, 2025 - 01:31 AM
To adjust the cutting depth on the AEG BKS18C2 Compact Drill Driver, follow these steps:
1. Ensure that the drill driver is turned off and the battery pack is removed.
2. Locate the depth adjustment lever or xxxx on the side of the tool.
3. Slide or rotate the depth adjustment lever or xxxx to the desired cutting depth. The depth is usually indicated in millimeters on the tool.
4. Once the desired cutting depth is set, tighten the depth adjustment lever or xxxx to secure it in place.
5. Reinstall the battery pack and turn on the drill driver.
Please refer to the instruction manual for more detailed instructions and illustrations on adjusting the cutting depth of the AEG BKS18C2 Compact Drill Driver.
Add New Comment