User Manual Q&AAnswer
Feb 04, 2025 - 01:18 AM
To charge the WORX WX240 Mini Electric Screwdriver, follow these steps:
1. Connect the USB-C cable to the charger provided.
2. Plug the charger into a matching socket.
3. During the charging process, the green light on the charger will flash.
4. Once the charging is completed, three cells of the green light will always be on.
5. Unplug the charger and disconnect the charging cable from the screwdriver.
6. The screwdriver is now ready to be used.
Note: The USB-C cable is suitable for the charger with an output of 5V 1000mA. Make sure to charge the battery for at least 5 hours before initial use to fully utilize the battery capacity.
Please refer to the "BEFORE OPERATION" section in the user manual for visual illustrations and additional information.
Add New Comment