User Manual Q&AAnswer
Feb 04, 2025 - 01:07 AM
To assemble the EKVIP 021786 Advent Star, please follow the steps below:
1. Start by unpacking the product carefully. Ensure that you do not connect the product to the mains while it is still in the pack.
2. Locate the light fitting and the power cord. Take note that the power cord is not replaceable, so if it is damaged, you will need to discard the complete product.
3. Find a suitable location for the Advent Star indoors. It is designed for indoor use only.
4. Once you have chosen the location, connect the light fitting to the mains supply. Ensure that the light fitting is not connected to the mains supply when inserting or removing the light source.
5. The Advent Star is designed for use with light sources of energy class A++ to D. Make sure to use a compatible light source with a socket E14.
6. The product has a cord length of 3.5 meters, allowing for flexibility in placement. Adjust the cord length as needed.
7. The Advent Star has a diameter of 75 cm. Take note of the dimensions to ensure it fits well in your chosen location.
8. Finally, refer to the safety instructions and symbols provided in the manual. These will guide you on the proper usage and precautions to take while using the Advent Star.
Remember to always follow the instructions provided in the user manual for safe and correct assembly of the EKVIP 021786 Advent Star.
Add New Comment