User Manual Q&AAnswer
Feb 04, 2025 - 01:06 AM
To change the settings of the HOFTRONIC 5438127 Remote Control LED Cali Highbay using the remote control, follow these steps:
1. Press the "SETTING" button on the remote control. The LED indicators on the remote control will show the latest parameters you have set.
2. Press the up or down button to navigate and select the desired setting condition. The parameter LEDs on the remote control will flash to indicate the selected setting.
3. Use the left or right button to choose the new parameters for the selected setting.
4. Press the "OK" button to confirm and save all the settings.
5. Aim the remote control at the target sensor and press the "SEND" button to upload the new parameters. The LED light on the sensor that is connected will blink as confirmation.
Note: If you have multiple sensors that need the same parameters, you can aim the remote control at each sensor and press the "SEND" button to duplicate the settings.
Please refer to the user manual for more detailed instructions and information on specific settings and parameters.
Add New Comment