How do I connect the Rayrun PB.0 LED Controller to my LED loads and power supply? (Rayrun PB.0 LED Controller User Manual)

Answer

manuals.plus

Feb 04, 2025 - 12:56 AM


To connect the Rayrun PB.0 LED Controller, you will need to follow these steps:

1. Connect the power supply input: Connect the red power cable from the controller to the positive terminal of your power supply. Connect the black power cable from the controller to the negative terminal of your power supply. Make sure the power supply voltage is within the range of DC 6V to 24V.

2. Connect the LED loads: The LED loads should be constant voltage driving and have a common anode connection. Make sure the LED rated voltage is the same as the power supply voltage. Each channel's maximum load current should be below the controller's rated current. The mapping of the channels for different applications is as follows:
   - Single color: Connect the LED loads to CH1 (white cable) on the controller.
   - CCT: Connect the cool white LED load to CH1 (white cable) and the warm white LED load to CH3 (red cable) on the controller.
   - RGB: Connect the green LED load to CH2 (green cable), the red LED load to CH3 (red cable), and the blue LED load to CH4 (blue cable) on the controller.
   - RGBW: Connect the white LED load to CH1 (white cable), the green LED load to CH2 (green cable), the red LED load to CH3 (red cable), and the blue LED load to CH4 (blue cable) on the controller.

Make sure all cables are well connected and insulated before powering on the controller. For more detailed information, please refer to the Rayrun PB.0 LED Controller User Manual.