User Manual Q&AAnswer
Feb 04, 2025 - 12:53 AM
To connect the Rayrun CASAMBI XB50 LED Controller to your LED loads and power supply, follow these steps:
1. Power supply input: Connect the power supply to the controller's power input. The controller accepts supply voltage from DC 8V to 50V. Make sure the power supply voltage matches the LED load's rated voltage. The power input '+' unit is directly connected to the output terminal '+' unit inside the controller.
2. Wiring: Connect the controller's output to the LED loads. The LED loads must be constant voltage driving type and have a common anode connection for multi-channel models. Ensure that all cables are well connected and insulated before powering on.
Note: For multiple application output wiring (1-5 channel application from single color to RGB+CCT), refer to the diagram provided in the manual.
Please refer to the Rayrun CASAMBI XB50 LED Controller User Manual for more detailed instructions and illustrations.
Add New Comment