User Manual Q&AAnswer
Feb 04, 2025 - 12:33 AM
To mount the ADVATEK R4D-S PixLite Receiver, you have two options: wall mount or DIN rail mount.
1. Wall Mount:
- Use four screws suitable for the mounting surface (not supplied).
- The screws should be pan head type, 3mm in thread diameter, and at least 15mm long.
- Assemble the unit onto the wall/ceiling using the four screws.
2. DIN Rail Mount:
- Use the optional mounting kit (part number MNT0101).
- Align the receiver's mounting holes with the outermost mounting holes on each bracket.
- Use the four supplied M3, 12mm long screws to assemble the receiver to the mounting brackets.
- Align the lower edge of the bracket with the lower edge of the DIN rail and push the receiver down until it clicks onto the DIN rail.
- To remove the receiver from the DIN rail, pull the receiver horizontally toward its power connector and rotate the receiver up and off the rail.
Please refer to the ADVATEK R4D-S PixLite Receiver User Manual for visual illustrations and additional information on mounting options.
Add New Comment