User Manual Q&AAnswer
Feb 04, 2025 - 12:15 AM
To connect the motor to the Applied Motion Products 2035-O Half Step Drive, follow these steps:
1. Make sure the motor power supply is turned off before connecting the motor to the drive.
2. Identify the number of leads on your motor. STEP motors can have 4, 6, or 8 leads.
3. The motor leads are wired to 4 connections on the drive in various combinations. The specific wiring configuration will depend on the motor and its specifications.
4. Refer to the specifications or FAQs on the Applied Motion Products website to find out more about the different ways of connecting your motor.
5. It is important to secure any unused motor leads to prevent them from shorting to anything.
6. Never disconnect the motor while the drive is powered up.
7. Never connect motor leads to ground or to a power supply.
By following these steps and referring to the specifications or FAQs on the Applied Motion Products website, you can properly connect your motor to the 2035-O Half Step Drive.
Add New Comment