User Manual Q&AAnswer
Feb 04, 2025 - 12:14 AM
To wire the STRAC2 Stepper Drive to an AC power supply, follow these steps:
1. Select the power input voltage: The AC input voltage must be selected using the switch on the drive. Before powering on, check the input voltage to avoid any damage.
2. Wire the drive to the AC power source: Use the connector supplied with the drive and one of the ground terminals on the drive to connect the AC supply. Refer to the diagram provided in the user guide for the correct wiring configuration.
- Use 16 AWG wire for the Line (L) and Neutral (N) connections.
- Use 14 AWG wire for the Earth Ground (G) connection.
Note: Do not apply power until all connections to the drive have been made.
For more detailed instructions and illustrations, please refer to the Applied Motion Products STRAC2 Stepper Drives User Guide, which can be downloaded from the Applied Motion Products website.
Add New Comment