User Manual Q&AAnswer
Feb 04, 2025 - 12:07 AM
To attach the JiBen m006gn10x Flexible Gooseneck LED Lighted Magnifying mirror to a surface, please follow these steps:
1. Ensure that the surface you want to attach the mirror to is clear, flat, and smooth. The surface should be at least 3 inches by 3 inches in size.
2. Clean the surface thoroughly to remove any dirt, dust, or moisture. Non-porous surfaces like glass, ceramic tiles, porcelain, marble, granite, and fiberglass are the best candidates for the suction cup's use. Avoid textured walls, wallpaper, stucco, drywall, grout, and other textured surfaces.
3. Hold the mirror with the suction cup facing towards the surface.
4. Press the suction cup firmly against the surface, ensuring that it is fully attached and creating a strong seal.
5. Once attached, you can adjust the mirror's position by using the flexible gooseneck. The gooseneck allows you to bring the mirror closer to you or adjust it to the desired angle for optimal viewing.
6. To remove the mirror, gently pull on the edge of the suction cup to release the seal.
Please note that the suction cup requires a smooth and clean surface to function effectively. If the mirror does not adhere properly, try cleaning the surface again and ensuring a strong seal between the suction cup and the surface.
For further assistance or troubleshooting, please refer to the JiBen m006gn10x Flexible Gooseneck LED Lighted Magnifying User Guide.
Add New Comment