User Manual Q&AAnswer
Feb 04, 2025 - 12:06 AM
Sure! Here are the step-by-step instructions for assembling the Spectra S2 Plus Electric Breast Milk Pump:
1. Before using the breast pump for the first time, sanitize the breast shield in boiling water for 5 minutes. Note: Do not boil for more than 5 minutes, as the breast shield may become distorted.
2. Assemble the Back-Flow Protector:
a. Insert the white silicone membrane into the lower case.
b. Insert the upper case into the assembled silicone membrane.
3. Assemble the Pump Kit:
a. Push the valve into the breast shield.
b. Insert the back-flow protector into the breast shield.
c. Fasten the bottle onto the breast shield.
d. Insert the tubing into the back-flow protector.
4. Connecting the Tubing to the Pump:
a. Connect one end of the tubing to the back-flow protector.
b. Connect the other end of the tubing to the pump.
Once you have assembled the pump, you can follow the pumping guide provided in the manual for instructions on how to use the pump effectively. Remember to relax your body, stimulate your let-down reflex before pumping, and express milk from each breast for 10-15 minutes.
For more detailed information and illustrations, please refer to the "Components and Assembly" section of the Spectra S2 Plus Electric Breast Milk Pump Instruction Guide.
Add New Comment