User Manual Q&AAnswer
Feb 04, 2025 - 12:05 AM
To connect the Ecler IW103 loudspeaker, you will need to use the crimp connector type terminals for stripped wire. If you require a low sound level, connect the loudspeaker to the COM and 15W terminals. If you need a higher sound level, connect it to the COM and 30W terminals. Always make sure to respect the polarity when connecting the wires. Please note that accidentally connecting the system at low impedance (8 ohms) will not cause damage to the loudspeaker, but it will reduce its performance significantly.
For further details on the installation process, please refer to the "CONNECTING" and "INSTALLATION" sections in the user manual.
Add New Comment