User Manual Q&AAnswer
Feb 03, 2025 - 11:57 PM
To connect the gofanco HD14Ext1xN HDMI Over IP Extender 4K30 Kit to your devices, follow these steps:
1. Power off all devices, including your HDMI source and HDMI display.
2. Connect your HDMI source device to the Transmitter's HDMI Input connector using an HDMI cable (not included).
3. Optional: Connect the IR Blaster cable to the Transmitter's IR Output port, facing the eye towards your HDMI source device's IR window. This connection is only necessary if you need to control your HDMI source from a remote location.
4. Plug a CAT6/7 cable between the Transmitter's RJ45 Output and the Receiver's RJ45 Input.
5. Connect your HDMI display to the Receiver's HDMI Output connector using an HDMI cable (not included).
6. Optional: Connect the IR Receiver cable to the Receiver's IR Input port. This connection is only necessary if you need to control your HDMI source device from a remote location.
7. Plug the included power adapters into the Transmitter's and Receiver's power jacks, then connect both power adapters to a reliable power source.
8. Power on all connected devices.
9. The HDMI extender is now ready for use.
For more detailed instructions and illustrations, please refer to the user guide provided with the product.
Add New Comment