User Manual Q&AAnswer
Feb 03, 2025 - 11:43 PM
To pair the remote transmitter with the receiver collar on the PetSpy P620 Dog Training Shock Collar for Dogs, follow these steps:
1. Ensure that both the remote transmitter and receiver collar are fully charged.
2. Turn on the remote transmitter by pressing and holding the power button for about 3 seconds until the LCD screen lights up.
3. Press and hold the "Mode" button on the remote transmitter until the LCD screen displays a flashing "P" symbol.
4. Within 10 seconds, press the "Mode" button again to select the desired channel (1, 2, or 3). The selected channel will be indicated by a solid "P" symbol on the LCD screen.
5. Press the "Y" button on the remote transmitter to pair it with the receiver collar. The LCD screen will display a flashing "Y" symbol.
6. Within 10 seconds, press the power button on the receiver collar. The LED light on the collar will flash, indicating that it is ready for pairing.
7. Once the pairing is successful, the LCD screen on the remote transmitter will display a solid "Y" symbol, and the LED light on the receiver collar will stop flashing.
Note: If the pairing process is not completed within 10 seconds, you will need to start over from step 3.
For more detailed instructions and illustrations, please refer to the user manual provided for the PetSpy P620 Dog Training Shock Collar for Dogs.
Add New Comment