User Manual Q&AAnswer
Feb 03, 2025 - 11:33 PM
To set up the TP-Link Archer AX80 AX6000 Wi-Fi 6 Router, follow these steps:
1. Connect the Hardware:
- Unplug the power to turn off your modem and remove the backup battery if it has one.
- If your internet connection is through an Ethernet cable directly from the wall, connect the Ethernet cable to the router's 2.5 Gbps WAN/LAN port.
- Power on the modem and wait for it to restart.
- Connect the power adapter to the router and turn it on.
- Verify that the LED is solid on (red or blue) before proceeding.
2. Set Up the Network:
Method ONE: Via TP-Link Tether App
- Download the TP-Link Tether app on your mobile device.
- Open the Tether app and log in with your TP-Link ID (create one if you don't have an account).
- Tap the "+" button in the Tether app and select "Wireless Router > Standard Routers." Follow the on-screen instructions to complete the setup and connect to the internet.
Method TWO: Via a Web Browser
- Connect your device to the router wirelessly or with an Ethernet cable.
- Launch a web browser and enter "http://tplinkwifi.net" or "http://192.168.0.1" in the address bar.
- Create a password to log in (if the login window does not appear, refer to Q2 in the manual).
- Follow the step-by-step instructions to set up the internet connection and register for the TP-Link Cloud service.
LED Explanation:
- Solid Orange: Wi-Fi is off.
- Pulsing Orange: System is starting up.
- Solid Red: No internet connection.
- Pulsing Red: Wi-Fi is off and no internet connection.
- Solid Blue: Router is working properly.
- Pulsing Blue: Firmware is being upgraded, WPS connection is being established, or router is being reset.
Button Explanation:
- WPS: Press the WPS button on the router and on your client device to start the WPS process.
- Wi-Fi: Press and hold the Wi-Fi button for about 2 seconds to turn on or off the wireless function of the router.
- LED: Press the LED button to turn on or off the LED of the router.
- Reset: Press and hold the button for about 6 seconds until the LED blinks to reset the router to its factory default settings.
For more technical support, replacement services, user guides, and community interaction, visit the TP-Link support website.
Add New Comment