User Manual Q&AAnswer
Feb 03, 2025 - 11:03 PM
To connect your speakers to the ecler eHMA Series Mixing Amplifier, you have two options depending on the type of speakers you have.
1. Low Impedance Output: If your speakers have a low impedance (4Ω), you can use the LOW-Z OUT terminals on the rear panel of the amplifier. Connect the positive (+) terminal of your speaker to the positive (+) terminal of the LOW-Z OUT, and connect the negative (-) terminal of your speaker to the negative (-) terminal of the LOW-Z OUT.
2. High Impedance Output: If your speakers have a high impedance (70V or 100V), you can use the HIGH-Z 70/100V terminals on the rear panel of the amplifier. Connect the 0V terminal of your speaker to the 0V terminal of the HIGH-Z OUT, and connect the 70V or 100V terminal of your speaker to the corresponding terminal of the HIGH-Z OUT.
It is important to note that the total power required by your speakers should not exceed the nominal power supplied by the eHMA model you have. Make sure to follow the wiring diagrams and instructions provided in the user manual for proper connection and operation of your speakers with the amplifier.
Add New Comment