User Manual Q&AAnswer
Feb 03, 2025 - 11:03 PM
To connect the Fosi Audio BT20A amplifier to your speakers, you can follow these steps:
1. Prepare the necessary equipment: BT20A amplifier, 24V power supply, passive speakers, and speaker wires or banana plugs.
2. Connect the BT20A amplifier to the passive speakers using speaker wires or banana plugs. If using bare wire connection, release the horn terminals block terminals, insert the two ends of the speaker wire into the amplifier and speaker terminal holes, and tighten the horn terminals. If using banana plugs, release the banana jacket, loosen the xxxx , insert the speaker wire and tighten the xxxx , tighten the banana jacket, and insert the banana plug into the horn terminals of the speaker and amplifier.
3. Connect the 24V power supply to the DC input of the BT20A amplifier.
4. Toggle the power switch on the front panel of the BT20A amplifier upwards to turn it on.
Note: Make sure the volume/power switch is in the OFF position before connecting the power supply.
For more detailed instructions and illustrations, please refer to the "Quick Setup" section in the Fosi Audio BT20A User Manual.
Add New Comment