User Manual Q&AAnswer
Feb 03, 2025 - 11:01 PM
To assemble the Pyle PLPTS25 Portable Adjustable Laptop Stand, follow these steps:
1. Start by removing the end caps from the two stabilizer rods.
2. Assemble the left/right support brackets. Take one side of the upper supports and match it with the corresponding side lower support. The lower supports feature an anti-slip grip pad on the bottom. Align the mounting holes at the desired height and position the xxxx Knobs through the supports. Ensure not to over-tighten.
3. Note that the Stabilizer Bars must be positioned at least 2 holes apart.
4. Repeat steps 1 and 2 above to assemble the other side of the stand's support bracket, aligning the correct heights of the stabilizer rods.
For a visual demonstration of the assembly process, you can refer to the video provided in the product manual.
Please note that these instructions are a summary, and it is recommended to refer to the complete user manual for detailed instructions and illustrations.
Add New Comment