User Manual Q&AAnswer
Feb 03, 2025 - 10:55 PM
To connect the SD20 PLC Master Slave Programmable LED Driver to the master driver, follow these steps:
1. Ensure that you are using the slave driver with a compatible master driver. Do not use it with any other power supply.
2. Connect the slave driver's LED output to the LED light that you want to drive.
3. Connect the master driver's output cable to the power input of all the slave drivers. Make sure to check the polarity and ensure it is correct.
4. Before connecting the master driver's AC power, ensure that the LED current setting on the master driver is correct.
5. Once the LED current setting is confirmed, connect the master driver's AC power.
Please note that it is important to follow these steps carefully to ensure proper installation and avoid any damage to the lighting fixture or drivers.
Add New Comment