User Manual Q&AAnswer
Feb 03, 2025 - 10:50 PM
To connect the HOFTRONIC 5436000 Smart Driver to the app, follow these steps:
1. Switch off the power group before starting the installation process.
2. Connect the transformer to a 230V power source. The blue cable (N) should be connected to the neutral wire, and the brown cable (L) should be connected to the live wire.
3. If you are installing the transformer outdoors, it must be placed in a water/moisture-resistant housing (ART. NO. 396302 or 4409418). Note that the recessed spots can only be used in a covered area.
4. Turn on the power once to activate the driver.
5. Download and install the Hoftronic Smart app on your mobile device.
6. Open the app and follow the instructions to connect the driver. Make sure your mobile device is connected to the same Wi-Fi network as the driver.
7. To enter pairing mode, turn the product on and off three times. There should be a 5-second interval between each switching cycle to enter pairing mode.
8. Once the driver is in pairing mode, the app should detect it. Follow the on-screen instructions to complete the pairing process.
Please refer to the instruction manual for any additional information or troubleshooting steps.
Add New Comment