User Manual Q&AAnswer
Feb 03, 2025 - 10:36 PM
The eMOTUS5OD loudspeakers can accept high or low impedance. On the rear panel, there is a 5-position switch for selecting your work mode. The first 4 positions allow for the system to operate in high impedance, and the fifth position is for low impedance. The power selector on the 100V line will allow you to set the maximum power with which each unit will operate. In areas where a low sound level is needed, use the lower positions (3.75 to 7.5W), and in areas where a higher level is required, use the upper positions (15 or 30W). If you are using the loudspeaker in installations at 70V, the power ratings for the 100V position will be reduced to half, and for 50V installations, they will be reduced to a quarter. It is important to ensure that the connection cable joining the amplifier outputs and the loudspeakers are of good quality and as short as possible, especially when the distances to cover are considerable and the impedance of the loudspeakers is low.
Please refer to the "Connecting" section in the user manual for more detailed instructions and illustrations.
Add New Comment