User Manual Q&AAnswer
Feb 03, 2025 - 10:27 PM
Sure! Here are the step-by-step instructions for mounting the DEFA Proline 50 Interior and Industrial Luminaire using the suspension and screws, as stated in the instruction manual:
1. Place the suspension in the profile: Start by locating the profile or mounting surface where you want to install the luminaire. Take the suspension included with the luminaire and position it in the profile, ensuring that it is aligned properly.
2. Twist the suspension until it blocks: Once the suspension is in place, twist it clockwise until it locks into position. This will secure the suspension in the profile and prevent it from moving.
3. Adjust and fix its position by two screws: After securing the suspension, you can now adjust the position of the luminaire. Use the two screws provided with the luminaire to fix its position. Insert the screws into the designated holes on the luminaire and tighten them until the luminaire is securely fixed in place.
By following these steps, you should be able to successfully mount the DEFA Proline 50 Interior and Industrial Luminaire using the suspension and screws. For more detailed instructions and illustrations, please refer to the DEFA Proline 50 Interior and Industrial Luminaire Instruction Manual.
Add New Comment