User Manual Q&AAnswer
Feb 03, 2025 - 10:22 PM
To install the HOFTRONIC 4406882 Aurora LED Floor Lamp RGB, follow these steps:
1. Remove everything from the box and check if you have the lamp with one leg attached via the wire, 1 separate leg to be attached, and 1 tool bag.
2. Slide the separate leg onto the connection on the lamp body as shown in Fig.1.
3. Tighten 2 screws in the holes on the leg well. Make sure to tighten them properly to prevent the lamp from falling over or getting damaged later on.
4. Gently pull the cable tight, and this will cause the attached leg to move into the connection on the lamp body.
5. Tighten 2 screws in the holes on the leg as shown in Fig.3.
Please refer to the user manual for visual illustrations and additional information on the installation process.
Add New Comment