How do I connect the Amazon Basics B0898BXDQR DisplayPort to HDMI Adapter to my devices? (Amazon Basics B0898BXDQR DisplayPor t HDMI Adapter Instructions)

Answer

manuals.plus

Feb 03, 2025 - 10:02 PM


To connect the Amazon Basics B0898BXDQR DisplayPort to HDMI Adapter to your devices, follow these steps:



1. Identify the DisplayPort and HDMI ports on your devices. The DisplayPort is a rectangular port typically found on computers, laptops, or graphics cards, while the HDMI port is a smaller rectangular port commonly found on TVs, monitors, or projectors.



2. Ensure that both your DisplayPort and HDMI ports are compatible with the adapter. The B0898BXDQR adapter supports DisplayPort 1.2 and HDMI 1.4, allowing for a maximum video output of 4k@30Hz.



3. Insert one end of the adapter into the DisplayPort on your device. Make sure it is securely connected.



4. Connect the other end of the adapter to the HDMI port on your display device, such as a TV or monitor. Again, ensure a secure connection.



5. Once the adapter is properly connected, turn on your devices. They should automatically detect the connection and display the content on the screen.



Note: The B0898BXDQR adapter is intended for private indoor use only and should be used in dry indoor areas. Avoid exposing the adapter to dripping or splashing water. Also, remember not to bend or kink the cable to prevent any damage.



For further assistance or troubleshooting, you can contact Amazon customer service at +1 877-485-0385 or visit the Amazon help page for your respective country (US: amazon.com/gp/help/customer/contact-us, UK: amazon.co.uk/gp/help/customer/contact-us).