User Manual Q&AAnswer
Feb 03, 2025 - 09:58 PM
To adjust the torque on the Neomounts WL40S-910BL16 TV Pillar Mount, please follow these steps:
1. Locate the torque adjustment mechanism on the mount. It is usually a xxxx or xxxx that can be tightened or loosened.
2. Use a suitable tool, such as a screwdriver or wrench, to adjust the torque. Turn the xxxx or xxxx clockwise to increase the torque and counterclockwise to decrease it.
3. Gradually adjust the torque until the desired level of tension is achieved. Be careful not to overtighten, as it may damage the mount or the TV.
4. Once the torque is adjusted, ensure that the TV is securely held in place and does not move or wobble.
5. If necessary, periodically check and readjust the torque to maintain stability and prevent any potential issues.
Please note that the specific torque adjustment method may vary depending on the model and design of the Neomounts WL40S-910BL16 TV Pillar Mount. It is always recommended to consult the instruction manual provided by the manufacturer for detailed and accurate instructions.
Add New Comment