Answer

Feb 03, 2025 - 09:55 PM
To connect the Smappee EV Base to the power supply, follow these steps:
1. Cut both the power supply cables to the appropriate length and add ferrules to each conductor.
2. Measure the resistance of the grounding circuit and ensure it is within acceptable limits. Install a grounding point closer to the charging station if necessary.
3. Connect each supply cable to the correct terminal block indicated with L1, L2, L3, N, and PE.
4. If phase rotation is required, follow the recommended phase mapping for the EV Base as indicated in the manual.
5. Make sure the power supply cables and Ethernet cable are positioned through the central position of the floor plate recess.
Please note that the installation must be carried out by a qualified professional who has read the manual and works in compliance with IEC 60364 standards. It is important to disconnect the electric system from every power source before performing installation or maintenance work.
Add New Comment