User Manual Q&AAnswer
Feb 03, 2025 - 09:51 PM
To pair the PS01 sensor with the LED controller or driver, please follow these steps:
1. Open the sensor cover and locate the pairing key.
2. Cut off the power to the receiver that you want to pair with.
3. Wait for at least 10 seconds and then power on the receiver again.
4. Within 10 seconds after the receiver is powered on, short press the pairing key on the sensor to pair it with the receiver. If you want to unpair the sensor from the receiver, hold press the pairing key instead.
For more detailed instructions and illustrations, please refer to the user manual provided.
Add New Comment