User Manual Q&AAnswer
Feb 03, 2025 - 09:49 PM
To assemble the GENESIS Nitro 720 Gaming Chair, please follow the steps outlined in the instruction manual provided with the product. Here is a step-by-step guide:
1. Start by unpacking all the parts and lay them out in an organized manner.
2. Begin by attaching the backrest to the seat. Align the holes on the backrest with the holes on the seat and insert the screws provided. Tighten the screws securely.
3. Next, attach the armrests to the seat. Align the holes on the armrests with the holes on the seat and insert the screws provided. Tighten the screws securely.
4. Now, attach the gas lift mechanism to the seat. Insert the gas lift into the hole at the center of the seat and push it down until it locks into place.
5. Attach the base to the gas lift mechanism. Align the holes on the base with the holes on the gas lift and insert the screws provided. Tighten the screws securely.
6. Finally, attach the casters to the base. Insert each caster into the holes on the base until they click into place.
Make sure to double-check all the screws and connections to ensure they are tightened properly. It is recommended to use a screwdriver or Allen wrench for assembly, as mentioned in the manual.
If you encounter any difficulties during the assembly process or have any further questions, please refer to the detailed instructions and diagrams provided in the GENESIS Nitro 720 Gaming Chair Instruction Manual.
Add New Comment