User Manual Q&AAnswer
Feb 03, 2025 - 09:44 PM
To install the COREMORROW P78.Z100 Piezo Z Microscope Scanner, please follow these steps:
1. Ensure that the installation plane is relatively flat.
2. Use M4 or M6 screws to mount the P78.Z100 on the mounting surface directly and tighten them.
3. Ensure grounding protection for the connection.
4. Mount the load and tighten it properly to ensure positioning accuracy.
5. Connect the P78.Z100 connector with the corresponding controller according to the identification.
Please refer to the installation diagram provided in the user manual for a visual representation of the installation process.
It is important to note that the load should not exceed the maximum load capacity of the P78.Z100. When mounting the load, try to position it in the center of the moving surface. Avoid mounting long loads on one side of the platform as it may cause damage to the product.
For a more detailed and comprehensive guide, please refer to the "Installation and Precautions" section in the COREMORROW P78.Z100 Piezo Z Microscope Scanner User Manual.
Add New Comment