User Manual Q&AAnswer
Feb 03, 2025 - 09:40 PM
To properly install the COREMORROW P77A Piezo Phase Shifter, please follow these steps:
1. Ensure that the installation plane is relatively flat.
2. Use M6 screws to mount the P77A on the mounting surface directly and tighten them.
3. Make sure to ground the connection for protection.
4. Mount the load and tighten it properly to ensure positioning accuracy.
5. When mounting the load, ensure that the load quality is less than the maximum load capacity of the P77A and try to mount the load in the center of the moving surface.
6. Avoid mounting the load on one side of the moving platform, as this can cause serious damage to the product.
7. Use the correct length of screws during the fastening and connecting process to ensure proper installation.
8. Do not stretch or bend the cables and use the dedicated cable provided by COREMORROW to connect the P77A to the controller.
9. Do not connect via an extension cable casually. If you need a longer cable, please contact COREMORROW.
For more detailed instructions and illustrations, please refer to the "Installation and Precautions" section of the user manual for the COREMORROW P77A Piezo Phase Shifter.
Add New Comment