User Manual Q&AAnswer
Feb 03, 2025 - 09:34 PM
To properly install the COREMORROW P35 Piezo Tip-Tilt Platform, please follow these steps:
1. Before attaching the mirror, clean both the mirror and the motion surface. Allow the adhesive to solidify before use.
2. Mount the P35 on the mounting surface using M2.5 screws. You can also use an adapter if needed. Ensure that the mounting surface and adapter are clean before mounting.
3. Connect the P35 connector to the controller using the provided cable. Use the dedicated cable provided by COREMORROW and avoid using extension cables unless necessary.
4. When mounting the load, ensure that the load quality is within the maximum load capacity of the P35. Mount the load in the center of the moving surface for optimal positioning accuracy.
5. After installation, perform a safety check to ensure that the connection wires are not damaged, the drive power supply is grounded, and all screws are tightened.
For more detailed instructions and precautions, please refer to the COREMORROW P35 Piezo Tip-Tilt Platform User Manual.
Add New Comment