User Manual Q&AAnswer
Feb 03, 2025 - 09:17 PM
To properly install the COREMORROW P77.S/K36 Piezo Phase Shifter, please follow these step-by-step instructions:
1. Ensure that the installation plane is flat.
2. Install the load and tighten it properly to ensure positioning accuracy.
3. Connect the cable to the corresponding interface of the controller according to the connector head.
4. Use the provided special cable by CoreMorrow to connect the P77.S/K36 Piezo Phase Shifter to the controller.
5. Avoid stretching and bending the cables during installation.
6. Do not connect via an extension cable casually. If you need a longer cable, please contact CoreMorrow.
7. Slowly tighten the load when installing it, and make sure the torque is not too large to avoid damage to the mechanism.
Please refer to the installation diagram provided in the manual for a visual representation of the installation process. It is important to follow these instructions to ensure proper installation and avoid any damage to the product.
Add New Comment