User Manual Q&AAnswer
Feb 03, 2025 - 09:15 PM
To connect the Ecler IC6CLASS-TR loudspeaker to an audio amplifier, follow these steps:
1. Strip and connect the two wires of the speaker cable to the supplied loose Euroblock terminal, respecting the polarity between the speaker (IN + and -), the other speakers of the system, and the amplifier feeding them. Insert the loose Euroblock connector of the cable into the IN Euroblock terminal of the speaker.
2. Once the speaker is installed in the ceiling, you can access the power selection on the front panel. Using a flat screwdriver, set one of the power taps according to your requirements. The available power options are:
- Connection to a 70V line: 30W / 20W / 15W / 7.5W / 3.7W / 1.5W / 16Ω
- Connection to a 100V line: 30W / 20W / 15W / 7.5W / 3W / 16Ω
3. Test the operation by powering up the sound system.
Please refer to the user manual for more detailed instructions and illustrations on the installation and connection process.
Add New Comment