User Manual Q&AAnswer
Feb 03, 2025 - 08:59 PM
To connect the S20 piezo rotation stage to the controller, follow these steps:
1. Identify the connector on the S20. The driving cable interface is a 1-contact LEMO connector, and the sensor cable interface is a 4-contacts LEMO connector.
2. Use the provided dedicated cable from CoreMorrow to connect the S20 to the controller. The driving cable should be connected to the 1-contact LEMO connector on the S20, and the sensor cable should be connected to the 4-contacts LEMO connector on the S20.
3. Ensure that the connections are secure and tight.
Note: Do not connect via an extension cable casually. If you need a longer cable, please contact CoreMorrow for assistance.
For further assistance or if you have any other questions, please contact CoreMorrow's customer service at the provided contact information.
Add New Comment