User Manual Q&AAnswer
Feb 03, 2025 - 08:48 PM
To connect and install the Ecler VEO-MXH44 HDMI Matrix, follow these steps:
1. Connect your HDMI signal sources (such as PC, STB, etc.) to the HDMI Input ports on the VEO-MXH44.
2. Connect the HDMI Output ports on the VEO-MXH44 to your displays.
3. If required, connect audio and control devices.
4. Power up the VEO-MXH44, displays, and sources.
5. To control the VEO-MXH44 using the included IR Remote, connect the IR Receiver to the corresponding port on the front panel.
For more detailed instructions and information, refer to the "Connection and Installation" section in the user manual provided with the product.
Add New Comment