User Manual Q&AAnswer
Feb 03, 2025 - 08:40 PM
To install the GIGABYTE GC-WBAX200 motherboard and its Wi-Fi/Bluetooth card, follow these steps:
1. Step 1: Install the Wi-Fi/Bluetooth card in a PCI Express x1 slot. Connect one end of the USB cable to the USB connector on the Wi-Fi/Bluetooth card.
2. Step 2: Connect the other end of the USB cable to the F_USB connector on the motherboard.
3. Step 3: Tighten the antenna cables to the antenna connectors on the Wi-Fi/Bluetooth card respectively.
4. Step 4: Move the antennas to a place where the signal is good.
After the installation, you will need to install the drivers and utilities for the Wi-Fi/Bluetooth card. Start your computer and install the driver for the card. Adjust your wireless LAN configuration based on your environment after installing the driver.
Please note that unauthorized modifications or use of unauthorized antennas may cause interference and void the user's authority to operate the equipment. Follow the regulatory notices and guidelines provided in the manual to ensure proper usage and compliance with regulations.
For more detailed information and instructions, refer to the GIGABYTE GC-WBAX200 motherboard installation guide.
Add New Comment