How do I install the Interiors 1900 69832 Winchester Picture Light? (Interiors Winchester Picture Light Instruction Manual)

Answer

manuals.plus

Feb 03, 2025 - 08:31 PM

To install the Interiors 1900 69832 Winchester Picture Light, follow these steps:

1. Decide on the position of the light fitting or remove an existing light fitting. Make sure there is a solid mounting surface, preferably a wooden joist or joist bridge, to support the weight of the light fitting.

2. Take care not to drill into any pipes or mains cables beneath the surface during the preparation of mounting holes.

3. Switch off the mains supply during installation or maintenance. It is recommended to withdraw the fuse or switch off the circuit breaker at the distribution board while working (turning off the light switch is not sufficient). Connection should be via a wall switch to enable safe isolation.

4. Securely fix the product to the mounting surface using the screws and wall plugs supplied. Note that the screws and wall plugs provided are suitable for "masonry" only. Other fixings must be purchased separately.

5. Connect the house wiring to the terminal block of the light fitting. Ensure all electrical connections are tight and that no loose strands are left out of the terminal.

6. Fit the appropriate bulbs (sold separately) according to the specifications mentioned on the label. Never use bulbs with a higher wattage than specified, as this may cause overheating and damage to the fitting.

7. Turn on the mains supply and test that the light illuminates properly.

Please note that if you have any doubts about the installation or use of this product, it is recommended to consult a qualified electrician for assistance.