Answer
![manuals.plus](https://data3.answerbase.com/answerbase/15673/UserFiles/User3627018/profileImage3627018.jpg?638365818380000000)
Feb 03, 2025 - 08:13 PM
To connect the PixLite T8-S Mk3 to your computer or local network, follow these steps:
1. Connect the IEC Power Input of the PixLite T8-S Mk3 to a source of mains power (100-240V AC, 50/60Hz).
2. Connect an Ethernet cable to either of the Ethernet Ports on the PixLite T8-S Mk3.
- If you have a router, connect the other end of the Ethernet cable to the router. The PixLite T8-S Mk3 will automatically obtain an IP address from the router using DHCP.
- If you don't have a router, you can connect the PixLite T8-S Mk3 directly to your computer using the Ethernet cable.
3. If you have a router, the PixLite T8-S Mk3 and your computer will be assigned IP addresses automatically. If you don't have a router, proceed to the next step.
4. Download and install Advatek Assistant 3 from the URL provided: www.advateklights.com/advatek-assista...
5. Launch Advatek Assistant 3 and it will automatically discover any active PixLite devices on the network.
6. Double-click on the discovered PixLite T8-S Mk3 to open its Management Interface.
7. You can now configure your PixLite T8-S Mk3 using the Management Interface.
For more detailed information on physical connections, network connections, and operation, please refer to the PixLite T8-S Mk3 User Manual available at: www.advateklights.com/downloads/user-manuals/pixlite-t8-s-mk3
Add New Comment![Sending...](https://manuals.answerbase.com/images/loading-boxes.gif)