User Manual Q&AAnswer
Feb 03, 2025 - 08:04 PM
To connect the Ecler TRAIL103 Rail-Mount Loudspeaker to your audio system, you will need to follow these steps:
1. Determine the type of connection you need based on your installation type (lighting rail, surface mount, or truss mount).
2. If you are installing on a lighting rail, connect the male Euroblock connector to the desired input on the speaker's rear panel. Use the HI-Z IN connector for high impedance (100V line) operation and the LO-Z IN connector for low impedance operation.
3. For high impedance operation, use the red (30W) or blue (15W) terminals and the black (COM) terminal. For low impedance operation, use the red (+) and black (-) terminals.
4. If you are installing on a surface or truss, you will need to cut the audio cables and connect them to a xxxx terminal block. Refer to chapter 7 of the user manual for more information on this type of installation.
5. Once the connections are made, mount the speaker according to the chosen installation method. Follow the instructions provided in the manual for lighting rail, surface mount, or truss mount installation.
Please note that it is important to carefully read and understand the user manual before making any connections to ensure optimal operation and performance of the Ecler TRAIL103 Rail-Mount Loudspeaker.
Add New Comment