User Manual Q&AAnswer
Feb 03, 2025 - 07:59 PM
To install the GIGABYTE AORUS RX 6900 XT Graphics Card, please follow these steps:
1. Make sure your computer is turned off and the power cable is unplugged.
2. Remove the chassis cover of your computer.
3. Locate the PCI Express x16 or AGP slot on your motherboard. If necessary, remove any brackets from the back of the chassis.
4. Insert the graphics card into the slot firmly. If required, connect the external power cord to the graphics card.
5. xxxx in the bracket of the graphics card to the chassis and close the chassis cover.
6. Connect the appropriate cable (HDMI, DVI, D-sub, Display Port) from the graphics card to your display.
7. Reconnect the power cable to your computer.
For more detailed instructions and illustrations, please refer to the GIGABYTE AORUS RX 6900 XT Graphics Cards User Guide.
Please note that removing any labels on the graphics card may void its warranty. Additionally, the specifications mentioned in the manual may be subject to change due to rapid technological advancements. The author of the manual assumes no responsibility for any errors or omissions and does not commit to updating the information contained therein.
If you need to download the driver and utilities for the graphics card, you can visit the GIGABYTE website and download them from the provided link: http://download.gigabyte.us/FileList/...
If you have any further questions or need more information about GIGABYTE products, you can visit the GIGABYTE website at https://www.gigabyte.com.
Add New Comment