User Manual Q&AAnswer
Feb 03, 2025 - 05:46 AM
To pair the transmitter and receiver for the SadoTech ST-FX-C-H2O-MBL Wireless Doorbell, follow these step-by-step instructions:
1. Select a desired music/chime for one transmitter by pressing the Music Control Button on the receiver.
2. Set the receiver into learning mode (pairing mode) by pressing the Volume Control Button on the receiver for 5 seconds. You will hear a "pairing alert chirp" and see fast CONTINUOUS LED flashing on the receiver, indicating the pairing ready status.
3. Quickly trigger the pairing process within 5 seconds by pressing the transmitter push button. You will hear the music/chime you selected, indicating that the pairing is successful.
Note: It is important to trigger the transmitter within 5 seconds after entering learning mode, as the receiver will automatically exit the mode if no signal is received from the transmitter.
For pairing additional transmitters, simply repeat steps 1-3 for each additional transmitter.
Please refer to the SadoTech ST-FX-C-H2O-MBL Wireless Doorbell Instruction Guide for more detailed information and troubleshooting tips.
Add New Comment